Introduction
The Smart Pet Door uses RFID technology to provide secure and convenient access for your pets. Pets with an RFID sensor key can open the door, while other animals are kept out, ensuring safety and preventing intrusions.
Key Features
• 4 Access Control Modes:
1. No entry or exit.
2. Entry only, no exit.
3. Exit only, no entry.
4. Both entry and exit.
• Battery-Powered: Operates on 4 AA non-rechargeable alkaline batteries (not included), with an estimated battery life of 6 months (under optimal conditions).
• Customisable Settings: Adjust settings via the control panel "M" Button.
• Secure: RFID-based entry ensures only pets with the correct sensor key can access the door.
Product Specifications
• Flap Opening Dimensions: 190 mm (W) x 205 mm (H).
• Required Installation Hole Size: 263 mm (W) x 298 mm (H).
• Installation Thickness: Compatible with walls or doors 5–50 mm thick (optimal thickness: 35–45 mm).
• Battery Requirements: 4 x AA alkaline batteries.
• Standard Accessories:
• 2 RFID tag keys.
• 8 screws.
• 4 Screw caps
Installation Guide
1. Prepare the Installation Site:
• Cut a hole in the door or wall based on the dimensions (263 mm x 298 mm).
2. Attach the Pet Door:
• Use the provided screws to secure the pet door in place.
3. Check Alignment:
• Ensure the flap swings freely without obstruction.
Setup and Usage
Access Control Modes
• Use the M Button to select one of four modes: (once selected leave for 30 seconds to save or push the flap to save the setting)
After your pet passes through the flap or approaches it without entering, the door will lock for 30 seconds to prevent other animals from entering.
1. No entry or exit.
2. Entry only, no exit.
3. Exit only, no entry.
4. Both entry and exit.
The RF switch can be set to "off" if you do not want to turn off the tag function, Once turned back on you will need to reselect the access control mode.
Troubleshooting
1. Door Does Not Open:
• Check if the RFID tag is coded and within range.
• Ensure the battery power is sufficient.
2. Indicator Lights Flashing:
• Low battery warning. Replace with new alkaline batteries.
3. Access Control Malfunctions:
• Inspect the polarity of the magnet and adjust if necessary.
• Ensure the door panel moves freely without resistance.
4. Pet door is opening for pets without the RFID key tag.
This happens as the pet door is reading your pet's implanted microchip (not usually compatible) If your pet door is unlocking for pets without a key tag then you will need to individually register the key tags for the pets you wish to use the pet door. (Up to 4 key tags can be registered with the pet door and can be purchased online). To register key tags follow the steps below:
• Long press the M button and the 4 lights will flash in sequence and you will hear 3 beeps.
• Hold the key tag you wish to register close to the pet door.
• The indicator light confirms successful coding. Push the flap open to confirm and go back to the normal operating mode.
To clear key tags:
• Press and hold the M button, then insert the battery. All saved codes will be cleared when the pet door will beep three times.
Maintenance
• Battery Replacement: Replace batteries when the low battery indicator is active.
• Cleaning: Wipe the door and sensors with a damp cloth.
Warranty Information
This product comes with a one-year warranty. Please retain proof of purchase for warranty claims.
If you have any questions or need support, contact us via our help centre.